How to Clean a Whiteboard and Dry Erase Board
5 mins read

How to Clean a Whiteboard and Dry Erase Board

Why do we have Whiteboard, and how to clean it? Whiteboards are an excellent communication tool, but with time, they become messy with permanent marks.Mistakenly if you use permanent markers and pens, which leaves notes behind that can’t be wiped away.

However, you can removeit witha dry-erase or wet-erase marker, which is easy enough, but if the notes are left for a long time, these markers will leave stains.

Most whiteboards will have an eraser for cleaning, but it doesn’t work well, so if your whiteboard has collected stains and marks from frequent use. Here arethe simple tips you may check out.

How to Clean Dry Erase Board

Before cleaning your whiteboard, first, let me tell you how it’s made of. Dry-erase boards are usually created from melamine, porcelain, or glass.

The most affordable and commonly available dry-erase boards are made by using melamine. These cleaning methods are recommended for all three materials, but certain chemical products may negatively affect whiteboards made from melamine, which will be porous.

Step 1: Use a Fresh Dry Erase Marker

Dry Erase Marker
Dry Erase Marker

Have you ever used a permanent marker to write on a dry-erase board? Don’t get worried; it doesn’t ruin your whiteboard.

Get a fresh dry-erase marker and draw over the stained area with it. Allow it to dry, then use a whiteboard eraser to take off the fresh markings or old stains. If the stains are still visible, repeat the same process until you get the best results. This trick works well.

However, remember that melamine boards are most susceptible to permanent staining and can’t work with this technique.

Step 2: Clean the Board with a Cleaning Solution and a Soft Cloth

Soft Cloth
Soft Cloth

Now it’s time to give the entire board a thorough cleaning.You can use a formulated whiteboard cleaner like Expo Whiteboard Cleaner. There are also several household products that you might have in your drawer or cupboard.

Further, rubbing alcohol, hand sanitizer, and nail polish remover containing acetone, vinegar, and Windex are reliable on a whiteboard.

To clean the whiteboard: dampen a cloth and use it to rub in the cleaning accessory of your choice. Rinse the cloth with cold water to wash off the remaining cleaning solution.

Step 3: Wipe the Board with a Damp Cloth Daily

Damp Cloth Daily
Damp Cloth Daily

The best practice for keeping your whiteboard clean is to erase any markings once you have used it. Always wait until the markings have dried before erasing them to avoid ghosting. Keep in mind that markings left on surfaces for a long time can likely leave stains behind.

For daily cleaning, use a felt whiteboard eraser. Otherwise, a damp cloth will suffice while using a clean, dry cloth to dry the board.

Step 4: Don’t Use Abrasive Cleaners

Abrasive cleaners such as toothpaste, Comet, and baking soda all contain tiny particles that will scratch the surface of a dry-erase board. Furthermore, avoid using abrasive cleaners and wax-based solutions, which can be left a thin film on the whiteboard’s surface.

Make sure to avoid wiping a whiteboard with your bare hands because your skin oil can penetrate the surface and cause damage over time.

However maintaining a clean whiteboard looks easy, but daily maintenance is essential to ensure its longevity.

You can keep your dry-erase board looking new by following these four steps.

Whiteboard Maintenance Tips

It would be best if you cleaned your dry-erase board with a whiteboard cleaner every 2 or 3 days to helpit look best. Whiteboard cleaners will be in spray bottles or disposable wipes. If you regularly clean the board, make sure that your dry-erase ink doesn’t sit on the board for too long, which can cause stains.

How to Clean Whiteboard Erasers

Keeping your whiteboard erasers clean is key to maintaining your boards spotless. A whiteboard eraser will get filled with marker ink residue and hampering its ability to clean your dry-erase board.

Hence, lightly sweeping over the surface of your erasers with a soft-bristled brush will take off most of the residue collected in your eraser. If you want to do deep cleaning, which removes hard-to-remove residue, dip your brush in a mixture of dish soap and water before scrubbing.

Use any of our ideas to clean your whiteboard for your next presentation.

Leave a Reply

Your email address will not be published. Required fields are marked *